Friday, September 20, 2019
The Laser Communication System
The Laser Communication System This report is apprehensive with Optical communication in which the source of light is a laser and whose beam is modified for video, voice or data communication over the wide range of bandwidths, typically 1 GHZ or more. Since when the laser is invented, it has attracted the communication engineers because it is the revolutionary source of electromagnetic radiation. There are basically two principal reasons for this attraction. First, optical carrier frequencies are about ten thousand times higher than those available in the microwave part of the spectrum. If we can develop techniques for achieving even modest modulation percentage bandwidths, the information handling capacity can be increased at a great deal. The second reason relates to the narrow beam width that can be obtained from a laser. This means that power can be efficiently transmitted to distant points [1]. In this report I have prepared a Laser communication system in which we are transmitting our voice across the room with help of the Laser. We have described how the system is made i.e. complete description about the design of transmitter and complete description about the receiver. We also have tested the system and its working successfully. The components used for the project were very cheap and easily available (like transformer, led, solar cell, laser, microphone jacks, mic, amplifier, battery holder and batteries). This is in fact the best method to make a Cheapest Laser communication system. Basics about Lasers and optical fibers are described as both were important to know. The advantages and disadvantages of both laser communication system and optical fibers are discussed in this report. To make an optical communication system we must require sources of light. The properties of the two mostly used sources of lights i.e. LASER (Light Amplification by the Stimulated Emission of Radiation) and LED (Light Emitting Diodes) is also been discussed in a tabular form. By using this table we can identify which source to use at what time. There are also some challenges faced by the laser communication system and optical fibers, these are discussed and solution to some of them is also given. It is also been told that what will be the business benefits, when we will find the solution of those problems. This report is all about the short range communication but also can be used for long communication systems. Chapter 1: Literature review 1.1 Laser LASER is a short form of Light Amplification by the Stimulated Emission of Radiation. The theory of laser is that an atom in excited state encounters a photon of same energy that is equal to the gap energy between the excited and ground states of the atom. When this type of photon is encountered, then another photon is emitted which is of the same energy. The research in Lasers slowly continued and increased the scope area. There were different types of improvements in laser structure and design which enhanced the lifetime of the lasers, beam width was focused, improved continuity of output, regulated and short pulse duration, etc. Henceforth Transportations became largest areas in which lasers were thought to have application. Increasing telephone use, electronic transmission, relaying of television signals, and the need for communication in space all contributed to the emphasis placed on laser technology toward communications[2]. The major attraction to lasers for communications purpose is the fact that the quantity of data or information that an EM wave can carry is proportional to its frequency. One more interesting thing about Optical light is its frequencies; the optical frequencies are 109 times greater than the radio waves and also105 times greater than microwaves. Communication technology was growing day by day and Lasers were emerging as the ideal solution for this complex problem. There were huge amount of technical complications in using lasers for the communications, and it took many years of hard work and invention of other technologies which made laser communication practical. The first invention was the discovery by Charles Kao and George Hockham in 1970 that glass fibers could transmit laser light [2]. The working principle of the Laser communication system is very similar to fiber optic links, but the difference is that the beam is transmitted through free space. While the transmitter and receiver must require line-of-sight conditions, this is the only so called constraint of the laser communication system. As any barrier between the transmitter and receiver can cause the data loss but they have the benefit of eliminating the need for buried cables and broadcasting rights. Laser communications systems can be easily deployed since they are cheap, small, low power and do not require any radio interference stuff to revision. The carrier used for the transmission signal is generated by a laser diode. Two parallel beams are required, one for transmission and one for reception. But the system which is to be implemented in this project is only one way. Laser communications have been a very attractive topic lately, because it has given the solutions for how to satisfy ever increasing bandwidth needs which are in high demand. Some have suggested that bandwidth could be distributed in neighborhoods by putting laser communication systems on top of homes and pointing them towards a common transceiver with a fast link to the Internet [2]. With possible transmit speeds of up to a gigabit per second, this is an exciting area. 1.2 Optical fiber Before starting with the laser communication system we must also be familiar with optical fiber communications i.e. the communications with the help of glass fibers because laser communications is a part of optical communications somewhere, as laser communication can be done with and without optical fiber and laser is also a source of light in optical communication with LED (Light emitting diode) [3,9]. This thinking of optical communications with the help of the glass fiber was generated at the time of Alexander Graham Bell [4]. Yet it took many years for its practical implementations as better quality of glass and low cost electronic equipment was invented quite a while after that. In 1960s the development of the optical communication was started with the invention of the new devices and fibers and which is going on till now. The most interesting thing happened in 1980s. During these 10 years the public communication networks were developed for the optical communications and it became the most dominant technology. There were 3 major milestones in all the developments and they were following: [4] In late 1950s LASER was invented In 1970s low loss optical fiber was developed. In 1980s amplifier for the optical fiber was invented. The use of the optical communication technology blowout like a fire. And the coaxial copper wire, which were used in early times, were replaced by the optical fibers and a new era of technology emerged called as optical communications technology. The two technologies electronics communications and optical communications are very much closely related to each other but the principle of operation in both the technologies is different. There is a misconception in the people about optical communication that the light travels in the optical fiber as the current or electricity travels in wires. This is not true, because in optical communication systems light is an electromagnetic wave and optical fiber is a waveguide. Also the connection between the wires i.e. in the electronic communications is very easy as compared to the optical fibers. In optical communications we require connectors to join two optical fibers [3,4]. 1.3 Advantages and Disadvantages of optical fiber Now we should discuss some advantages and disadvantages of optical fibers over copper wire: 1.3.1 Advantages of optical fibers Data secrecy i.e. security of the data Data Truthfulness i.e. very low loss of data Long distance communications is possible without involving repeaters, amplifiers and boosters. Large amount of data can be communicated. Optical fibers are insusceptible to EM interference, but not immune to the alpha and the beta energies. These optical fibers are not unsafe to use them near the high voltage devices and an area where the earths potential is different because they have High electrical resistance. The power necessities of the optical fibers are low as compared to the wires. The optical fibers are very light in weight, so they are easy to carry. The speed of the transmitting is very high 1.3.2 Disadvantages of optical fibers The initial cost and the preservation cost of the optical fiber is quite high as compared to the wires To connect two optical fibers we need connectors and splices which are costly and more difficult to operate than wires. Optical fibers dont have ability to transmit electrical power for the operation of terminal devices Extra care is to be taken while handling the optical fibers, as they are very sensitive to physical shocks. 1.4 Sources of light in Optical communication system There are two main sources of the light in Optical communication systems and they are namely [3] LED Light Emitting Diode LASER- Light Amplification by the Stimulated Emission of Radiation It totally depends upon the certain factors like application, cost, performance, stability, power and cost, to use which type of source for the system. LED is generally used when them system power requirements is low. As LED make system small in size, reduces its cost, reduces the complexity of the system and also stable with temperature. LASER is used where the power requirement of the signal is high because if we use LED in high power requirements then the cost of the system will go high. Also in LASER the transmission rate is high, can do long distance communication and more reliable. The table on the next page compares properties of LED and LASER [3]. S. No. Features LASER LED 1. Power 100 mW 40 mW (max) 2. Light source Coherent Incoherent 3. Temperature Dependence High Low 4. Interference Self-interference No self-interference 5. Lifetime Long but lees than LED Long 6. Modulation speed Can be 1 GHz and faster 100 Hz 30 MHz (max) 7. Beam divergence Narrow Wide 8. Bandwidth req. Less than 1 nanometer 40 100 nanometers 9. Noise at receiver Low High 10. System cost Low for high power vice versa Low for low power high for high power 11. Reliability High Low 12 Accuracy High Low 13 Efficiency High Low 14. Use Long short distance communications Short-distance Communication 15. Signal damage Low High Table 1 According to this above table we can choose our source of light. In this technical report, we develop a basic Laser communication model which is used for long or short distance communications. Sometimes for the long n short Laser communication systems we use optical fibers and some times we do not use, totally depends upon the system [5]. Actions can be taken to increase the capability of the system i.e. to boost the data rate with low noise. This all is discussed in this report. Chapter 2: Review from the key paper The key paper I took for this topic is not actually a paper but a page on the internet called Light and Optics made by Simon Quellen Field [6]. It is equivalent to my key paper because the work done on this paper is very much similar to my project area. 2.1 Summary of the key paper 2.1.1 Project Objective The objective of this project is to make an optical communication system in which the source of light is a laser and which can transmit the signal from one point to another without using any cables wires etc. I am interested in this laser communication system because in this system the loss of data and the probability of erroneous are very low and It can also transmit the data at the great speed. This project only deals with the short distance communication [3]. 2.1.2 Project Description Fig. 1 Laser Communication System Figure 1 Laser communication system The system shown in the figure can send data at very high rate. The system illustrated above is set up to send voice data. The microphone input is fed to the transmitter, where the signal is modulated and then transmitted in free space with the help of a laser. The Laser output is according to the format of the result produced by the transmitter section i.e. varying intensities of light. On the receiver side, the signal is read by a photo transistor which converts the light signal to the electrical signal and then it is applied to a speaker. the basic principle is Amplitude modulation an in this case amplitude is intensity of light. This is the basic principle of the Laser communication system. 2.2 Experimental approach of the research [6]: Now we are going to discuss about the technique by which a laser communication system can be made. This method is the simplest method to make a laser communication system. Also this is the cheapest one. For the transmitter we will need A laser pen pointer. A battery holder which can contain equal number of batteries as the laser pointer is having. The size of the batteries may vary, but they should be of the same voltage as the laser batteries. Generally we have a battery holder which contains two batteries, but in this project we need at least three cells. So we can use one battery holder which holds two batteries n one battery holder which holds one battery, and a wire to connect them in series. A transformer as an audio output transformer having an 8 ohm coil and a 1000 ohm coil. A microphone and an amplifier or speaker. Some clip leads normally connecting wires with crocodile clips to connect every component. One clip lead must be the type with a long point, to get connected to the inner part of the laser pointer. The soldering procedure and simple wires can be used for this but the leads are fast, reliable and simple. At last we require a 2 lead bi-color light emitting diode (LED), to protect the damage done to the laser from high voltage spikes. For the receiver we will need: A small solar cell or a light sensitive diode i.e. photodiode having clips to attach simply or if clips are not possible then use soldering procedure. A microphone jack which fits into the audio amplifier or speaker by which we will get our audio output 2.2.1 Transmitter The clip lead is connected to the inner part of the laser where battery is touched. Now we have two clips to attach, to the laser and we do it in a normal way. Usually one of the clip is attached to the small spring which is in the lasers battery area and the second clip lead is usually attached to the case of the laser. Since there are various different types of laser pointers, we may have to do different type of settings with the placement of the clip lead for the proper working of the laser with the new external battery pack. There may arise some situations when we have to hold the lasers push button switch with help of a rubber band or any wire around it. The connection is tested before a transformer is attached to it. It done to make sure that the laser is working with the new battery pack or not. During the testing if the laser doesnt light, then the problem may be with the direction of the battery, the battery is reversed and tested again. This reversal of the battery will not damage the laser. As said before the transformer has two sides. One is 1000ohm and second is 8 ohm. The laser and battery is connected to the 1000ohm side. There are three wires which are coming out of the 1000ohm side of the transformer. We only use the outer two wires to connect the laser and the battery and the middle wire is not used in this circuit and is called a center tap wire. One end of the laser (clip lead used) is connected to the first wire of the 1000ohm side of transformer and the other end is connected to the batterys positive end. The negative end of the battery is connected to the second third wire of the 1000ohm side of transformer and the second one is left open. The bicolor light emitting diode (LED) is also connected to the two outer wires i.e. wire one and wire three of the transformer on the 1000ohm side. This part or LED is used as a protector of the laser which protects the laser from the high voltage spikes. As high voltages go to the LED and low voltages required for the laser go to laser. The laser is tested by attaching the battery. The laser must operate at this time. Now the connection to the 8 ohm side of transformer is made. The earphone jack is connected to that side of transformer. The schematic diagram of the transmitter looks like this: Figure 2 Transmitter for Laser communication system This is how it works. The work of the transformer here is to modulate the power which going to the laser. The signal which comes from the mike is added to and subtracted from the battery power accordingly to the situation, and the intensity of the laser is brightened or it is dimmed correspondingly with the amplitude of the voice in the signal. 2.2.2 Receiver The simplest part of laser communication system is its receiver. We just have to make the connection between the microphone jack and the solar cell. The two ends of the microphone jack are attached to the terminals of the solar cell. It hardly matters in which way the connection is made to it. The schematic of the receiver: Figure 3 Receiver for Laser communication system 2.2.3 Setup and testing We need to take care of two things at first. The mic should be off and laser should be on. Then we need to plug the jack of the transmitter into the opening of the mic. Now the solar cell is connected to the audio amplifier or speaker and the volume is increased till we are able to listen distortion and mocking noise when ever laser light falls on it. When we are able to listen that, then we decrease the volume till the noise is negligible. Now the next step is to aim the laser to fall on the solar cell. The laser is aimed to it and we can listen some noise in form of pop or click. Now if we move the laser beam over the solar cell from one end to another to it, then we will be able to listen these clicks till the laser falls on the solar panel and disappears when laser is not hitting the solar panel. If this all is happening, then everything is right till now [6]. Now the mic is switched on very watchfully and gradually the volume of mic is adjusted and something is said in the mic. The volume of mic is adjusted so that we can listen our voice coming out of the amplifier or speaker which is in the other corner of the room. If we are not able to listen our voice coming out of the amplifier, then we must check the laser, that the laser is hitting on the solar panel or not. If it is not hitting then we must adjust it to hit the panel, only then we can listen our voice. Now after doing all this adjustment, just increase the volume of amplifier or speaker instead of increasing the volume of mic, to listen your voice across the room. But precautions must be taken during the increase of the volume as if increased then a limit, will damage the laser. Now it is time to do some testing, just break the connection between the laser and the solar panel i.e. to put some obstruction in between, we will notice that the when the obstruction is inserted the amplifier does not produce any sound. Now move this obstruction back and forth or up and down such that connection is made and then broken at regular intervals, we will notice that our voice is chopped by the obstruction as it moves back and forth [6]. The basic principle behind the Laser communication system is Amplitude modulation. The amplitude of the carrier signal is modulated. In simple words, in this case the intensity of the light is varied along the time. Now what happens in transmitter is that when the sound is transferred through mic it travels through transformer which modulates the signal. Then the modulated signal is added and subtracted from the battery power. Then the signal produced goes to the laser and produces a laser beam of the varying intensities i.e. electric signal is converted to the light signal. This varying intensity beam hits the solar panel across the room, whose work is to convert this light signal to the electric signal and which goes to the audio amplifier to produce sound. Now it is interesting that how this speaker produces sound. This is very simple; speaker is just a paper cone which is attached to the coil of wire, which is in magnetic field due to a powerful permanent magnet. Now when electric current flows through the coil, it makes coil an electromagnet which moves away and towards the permanent magnet, which disturbs the air in paper cone, if it is moving away then it will compress the air at back and expand the air at front. These waves produced from compression and expansion is heard by our ears. This is how a Laser communication system is made [6]. On critically evaluating the key paper against the objectives which the author had set, the out come is that he is completely able to satisfy the aim of the project. By doing the procedures told in the project we can transmit signal from one end to another with the help of LASER. This project is cheap and very much informative too. Chapter 3: Evaluation and Outcomes If whole assessment of the data or information present in this research is done, then the conclusion is that researchers finding are justified. As by following the methodology or procedures of the researcher we are successfully transmitting data from one end to another with the help of the Laser by using cheap and simple components. In this experiment we can transmit data in form of voice from one end to another by the use of Laser wirelessly. The conclusions and the predictions made by the researcher are totally justified and also the methods used are completely working. This is an experimental procedure which tells that it is possible to transfer data from one point to another point with the help of the Laser. The outcome of the detailed research is positive. And following are the points which will tell us about the advantages of Laser communication systems [7]. 3.1 Enormous Bandwidths If we have used optical fibers in the system, then the data holding capability of the system is increased at a great rate. As this data holding capacity is directly proportional to the frequency of signal. 3.2 Low transmission loss As the signal is directly transmitted to the other end, and if no obstruction is in between the light, then the transmission loss is very low. 3.3 Invulnerable to noise The laser communication system using optical fibers are immune to noise and cross talks. And the systems which does not use the optical fibers are also immune to noise up to a limit, as there is very less transmission 3.4 High data rate The data rate in the Laser communication system is very high 3.5 Electrical Isolation Laser and optical fibers both are not affected by the electrical shocks. So both of them can operate near high voltage devices 3.6 Small size and weight The size and weight of both Laser and optical fibers is very small. So they are easy to handle. They occupy very less space as compared to the electrical equipments. Due to these rewards it makes it possible to use in aircrafts and satellites more successfully. 3.7 Signal security This point has two different point of views, if in system we are using optical fiber. Then our system is 100 percent secure as optical fibers do not radiate any power. Whereas if we are not using optical fibers then our information is not secured 3.8 Cheap and good availability Since Lasers and optical fibers both are available easily. And they are cheap also, which makes a efficient and cheap communication system. 3.9 Reliability There is less attenuation of the signal, so the integrity of the signal is saved. Therefore it makes the system more reliable. Some more advantages are [8] No difficulty in deployment High Data rate Bit error rate is very low Process can be fully duplex Protocol simplicity Fresnel zone is not important The Laser communication system using optical fiber is more preferred because using this method laser can be traveled to very far distances and also without any losses. The optical fibers can be connected using the connectors and splices. By using these, light can be made to move across the curvature of earth. Eventually we cant move light in circular path or cant be bent along the corners. But with the use of these connectors the light made to move like that without losses [10]. Chapter 4: Personal Recommendation for Further Investigation The recommendations for the further investigation will conclude some challenges faced by the Laser communication systems for the long distance. These challenges must be encountered to have a very good communication system [3, 4]. 4.1 Challenges in laser communication system Some of the major challenges are: Physical barriers This is one of the major challenges faced by Laser communication system. As whenever any obstructions comes in between the laser then the connection is broken immediately and we lose our data. Beam scattering During the long distance communications in Laser communication systems we face a problem called beam dispersion. That means after traveling a long distance the laser beam starts dispersing, which reduces the reliability of the systems. But if we use optical fibers then this dispersion can be ruled out. Fog, Snow, Rain and Smog or Pollution These are some of the elements which reduce the efficiency of the laser communication systems. They do not provide great deal of attenuation to the signal but still it hampers the signal. Circumstantial light and Shadowing The effectiveness of the system is also reduced when there is a background light source to the laser as the light from that source is also received by the receiver which create errors in the signal Atmospheric captivation Some part of the light signal is absorbed by the atmosphere. Due to which the signal is not completely attainted by the receiver. Scintillation All the laser communication systems are affected by the scintillation at the great deal in clear sunny days. But there are also some methods by which it can be controlled like tuned receivers, tuned filters, equally spaced transmitters and all. Pointing stability This is also an important factor in the Laser communication systems. To avoid this we may widen the beam divergence so that receiver still remains in contact. Security Security is the most important challenge to be faced by the Laser communication system. We have got the models for laser communication systems but the information is not secured. It can be theft by anyone easily. That is a different case if we are using optical fibers but in system in which we do not use these fibers are very much in secure and this is an important issue. 4.2 Challenges in optical fibers The optical fibers are very costly. Optical fibers are delicate and can be easily broken. Optical fibers are affected by the chemicals. There opaqueness is also a problem. To operate and work on the optical fiber we need a specialist and skilled person. All of the above points fall in the area of further investigation. Some of them are done and some are still there to be investigated. These areas are very important and we need to investigate in these areas because today the communication industry is a backbone of every industry without communication industry no industry can survive. 4.3 Business benefits On taking the business perspective of the improvements in these area will lead to the better communications at low cost, low loss of the signals, better performance, negligible time delay, better security, less complex systems, will increase the reliability of the communications, more and more application areas (such as medical, lighting and many more) Chapter 5: Personal Development Plan 5.1 Personal Description I am Gibbran Jamil. Currently I am pursuing my Masters of Science (MSc.) in Mobile and Satellite Communications from London Metropolitan University, London. I have done my Bachelors of Science in Computer Enigineering in Pakistan. From starting of my technical career I had a great interest in all this communication systems. I always was curious to know about communication systems, how they work, how they are made, how they transfer data, how link is made, how can two persons talk or share stuff on wires or how we can talk to each other without having any physical connection and all that. So I decided to go for my MSc. in Mobile and Satellite communications. I am doing this MSc. course because at present I am not that good in the technical stuff, so I want to improve my knowledge and grow technically and personally in this field. I want to work in the area, where I can improve the efficiency of the communication system. I either can work for a company or can work alone, but the basic idea is to reduce all the limitations in the communication system. There are many things in any communication system to be improved; like noise can be further reduced, received power from satellite can be increased, accuracy of the data can be increased, security of communication system can be increased, cost can be more reduced and many more things like that. Definitely first, I will go for one particular task and then move forward. I hope I am on the right path and I also hope after completing my Masters I will be having good technical and practical knowledge because right now I am concentrating on my all the modules and trying to grasp as many things as possible and my tutors are helping at a great deal in that. Still there is never an end for learning, i
Thursday, September 19, 2019
Coming of Age in Mississippi Essay -- essays research papers
The first main event that I believe led to Anne Moody becoming an activist for Civil Rights was when she was younger, her cousin George Lee was babysitting and he burned down the house in a fit of rage and when Daddy gets home he blames it on Essie Mae (Anne Moody). This foreshadows all of lifeââ¬â¢s injustices that will be thrown her way. The next time was when she made friends with white neighbors and they decided to go to the movies, Anne couldnââ¬â¢t sit with her friends, she had to sit in the balcony with all of the other blacks. She did not understand why it was this way. Another event was when she was in high school, she changes her name to Anne Moody, and a white boy, whose name was Emmitt Till who was visiting from Chicago, whistled at a white girl, and then a group of white men murdered him. This bothered Ann, and she didnââ¬â¢t work or sleep for days. When Samuel Oââ¬â¢Quinn, a black empowerment activist and NAACP member tried to organize a meeting, the Princi ple Willis, who is an Uncle Tom, tattled on him. Samuel was shot by a mob of white men. The first experience of a civil rights movement was when she was attending Natchez College in Mississippi. The lunch lady served food with maggots in it. The cook, Miss Harris, knew that the food was spoiled but didnââ¬â¢t care. Anne organized a protest and it was successful. This was a hint of what was yet to come from Anne. à à à à à Blacks in the south didnââ¬â¢t know what it was like to be equal to whites. Theyââ¬â¢ve been to... Coming of Age in Mississippi Essay -- essays research papers The first main event that I believe led to Anne Moody becoming an activist for Civil Rights was when she was younger, her cousin George Lee was babysitting and he burned down the house in a fit of rage and when Daddy gets home he blames it on Essie Mae (Anne Moody). This foreshadows all of lifeââ¬â¢s injustices that will be thrown her way. The next time was when she made friends with white neighbors and they decided to go to the movies, Anne couldnââ¬â¢t sit with her friends, she had to sit in the balcony with all of the other blacks. She did not understand why it was this way. Another event was when she was in high school, she changes her name to Anne Moody, and a white boy, whose name was Emmitt Till who was visiting from Chicago, whistled at a white girl, and then a group of white men murdered him. This bothered Ann, and she didnââ¬â¢t work or sleep for days. When Samuel Oââ¬â¢Quinn, a black empowerment activist and NAACP member tried to organize a meeting, the Princi ple Willis, who is an Uncle Tom, tattled on him. Samuel was shot by a mob of white men. The first experience of a civil rights movement was when she was attending Natchez College in Mississippi. The lunch lady served food with maggots in it. The cook, Miss Harris, knew that the food was spoiled but didnââ¬â¢t care. Anne organized a protest and it was successful. This was a hint of what was yet to come from Anne. à à à à à Blacks in the south didnââ¬â¢t know what it was like to be equal to whites. Theyââ¬â¢ve been to...
Wednesday, September 18, 2019
The Beard Makes the Man :: Ancient Greece Greek Essays
The Beard Makes the Man For the ancient Athenians, the beard was a common sign of manhood. The coming of a beard signaled a maleââ¬â¢s transition from boyhood into manhood. Men who lost their beards did not suffer loss of political rights or loss of privileges, but they were mocked and shamed. The beard, not height or body shape, interestingly, was considered the initial marker of manhood in the plays of Aristophanes. A beard is an easily recognizable and observable, and the lack or presence of a beard is easily changed for the stage by covering the actorââ¬â¢s beard with a mask or giving him a fake beard. The beard was clearly a particularly meaningful secondary characteristic for the Greeks. For the ancient Greeks, the beard was incredibly closely tied to the idea of manhood. In some cases, the word for beard could even be interchanged with the word for man. Men grow hair on their faces, women do not, but a manââ¬â¢s facial hair is easily removed by shaving. For this culture, the removal of the beard was a removal of a crucial element of manhood. Without a beard, a man was woman-like, despite any other characteristics that might distinguish him as a man. To become like a woman, a man merely had to remove his beard, but to become like a man, a woman had to disguise herself in many more ways. The beard, as a cultural way to distinguish men, is based on the biological phenomenon that males begin to grow hair on their faces during puberty. Despite seemingly being an easy way to separate men from women and children, the presence of a beard is not an all or none situation. A pubescent male will not go to bed bare-cheeked and wake up the next morning with a full beard. Puberty is a gradual process occurring over many years, and some men may never grow a completely full beard, even in maturity. As today, some women of ancient Athens must have themselves been quite hairy around the hair line, jaw, and upper lip. The beard is not as clear a man/boy or man/woman differentiation as it may initially seem. The beard is not a completely clear physical or biological trait, but it was clearly a significant characteristic for the ancient Athenians. In Aristophanesââ¬â¢s play Women at the Thesmophoria, the kinsman of Euripides tries to pass for a woman by shaving his beard and singeing his pubic hair.
Tuesday, September 17, 2019
Information Systems in Global Business Today Essay
How IT drives the UPS operation worldwide. Using smart people and smart technology, UPS delivers over 14 million packages daily to 200 countries and territories, requiring the talents of 70,000 drivers who are wirelessly connected to UPS main databases located in seventeen major data centers throughout through out the world. Case United Parcel Serviceââ¬â¢s global operations are driven by its information systems technology. What UPS can do is largely a function of its information technology investments. Beginning as a local delivery service in 1907, UPS expanded on the West coast initially, reached New York in the 1930s, and went international in the 1970s. Today, UPS delivers over 14 million packages daily to 200 countries and territories, requiring the talents of 70,000 drivers who are wireless connected to UPS main databases located in seventeen major data centers throughout through out the world. A multi-year, multibillion dollar investment in technology drove the growth of UPS over the last twenty five years beginning in 1990. This investment enabled the development of the DIAD, the Delivery Information Acquisition Device. DIAD is a key element in UPSs business technology platform. Company spokesmen say that ââ¬Å"UPS revolutionized the package delivery business in 1991 when it developed and deployed the first Delivery Information Acquisition Device, known as the DIAD. More than twenty years later, UPS continues its pioneering development efforts with the fourth generation of the DIAD ââ¬â the DIAD IV. To ensure maximum flexibility in field transmission capabilities, DIAD IV includes multiple wireless connectivity options. Each DIAD IV features a built-in GPRS and CDMA radio, an acoustical modem to facilitate dial-up access if necessary, and 802. 11b wireless local area network connectivity to enable transmission in a UPS center. The DIAD IV also features a Bluetooth wireless personal area network and an infrared (IrDA) port to communicate with peripheral devices and customer PCs/printers. DIAD IV introduces a revolutionary new feature ââ¬â Global Positioning Satellite (GPS) ââ¬â to the handheld terminal market. UPS plans to use this technology to provide drivers with more detailed directions to pick-up and delivery points in order to improve customer service. The monochrome screen on previous DIADS will be replaced with a color screen that accommodates more information which can be displayed in an easier-to-read, more attractive manner. The color screen also enables UPS to color-code messages transmitted to a driverââ¬â¢s DIAD. Urgent customer pickup messages, for example, can be color-coded to alert the driver. In addition, the DIAD IV contains 128 megabytes of memory ââ¬â 20 times the capacity of the DIAD III. UPS will use this expanded capacity to provide new and improved customer services. Like its predecessors, the DIAD IVââ¬â¢s battery lasts an entire work day. The DIAD IV sends delivery information to the UPS data repository as soon as the delivery information is entered. Drivers simply scan the package bar code, collect the receiverââ¬â¢s signature electronically, type in the Copyright Notice This work is protected by United States copyright laws and is provided solely for the use of instructors in teaching their courses and assessing student learning. Dissemination or sale of any part of this work (including on the World Wide Web) will destroy the integrity of the work and is not permitted. The work and materials from this site should never be made available to students except by instructors using the accompanying text in their classes. All recipients of this work are expected to abide by these restrictions and to honor the intended pedagogical purposes and the needs of other instructors who rely on these materials. last name of the receiver and push a single key to complete the transaction and send the data. There is no need to activate a cell phone or return to the vehicle. Part of what makes the DIAD such a powerful tool is the system ââ¬â ODS (On-Demand Services) ââ¬â that enables communication with the driver. Every UPS driver automatically logs into the ODS system first thing in the morning. This allows dispatchers and center management to access the driver via his/her DIAD throughout the day by sending generalized text messages. Virtually all drivers start their day with a list of predefined customer pickup locations for that day. Thanks to ODS, the addition of a one-time pickup can be added to a driverââ¬â¢s work list on-the-fly, enabling UPS to take best advantage of the geographic location of its entire fleet for servicing pickup requests. By using the DIAD, UPS eliminates the use of 59 million sheets of paper per year. The DIAD IV is the most comprehensive tracking device in the delivery industry, combining data collection and transmission technologies, digital signature capture, extensive expandable memory and rugged construction to withstand extreme temperatures and hard falls. â⬠Other Features The UPS technology infrastructure enables UPS to offer its customers many services, such as package tracking, freight planning, and freight truck packing optimization, in addition to the basic shipment of packages.
Monday, September 16, 2019
Review of Literature Essay
Dear client, please fill in the dates in the submissions and the blanks. thank you. Key milestones have already been established for this project, as recommended by the KBSââ¬â¢s PLS FILL UP PROGRAMME NAME. : Interim Project Submission 12 July 2006 Draft Project Submission 1 September 2006 Final Project Submission 30 September 2006 Through these dates, a draft of the programme has been formulated in addition to the enumeration of the additional milestones. At this point the framework is an estimation of the dates of deliverables of the objects in the milestones as these depend on the coordination and the cooperation of the identified proponents of this proposed research. At this point the research aims to get the appropriate permissions and letters needed that requests for the formalisation of the participation, especially as this requires working with bars and clubs. DEAR CLIENT, PLEASE FILL UP THE APPROPRIATE DATES FOR YOUR RESEARCH PROGRAMME IN THIS TABLE, THANK YOU. Activity No of Days Start Date Finish Date. Project Proposal Submission 0 Thu 04/05/06 Thu 04/05/06 Literature Review 90 Mon 01/05/06 Fri 01/09/06 Refine Methodology 31 Thu 04/05/06 Thu 15/06/06 Meet with potential project sponsor(s) 3 Thu 01/06/06 Mon 05/06/06 First Draft of Questionnaire 10 Thu 01/06/06 Wed 14/06/06 Identify Questionnaire Addressees 10 Thu 01/06/06 Wed 14/06/06 Identify and contact potential interviewees 10 Thu 01/06/06 Wed 14/06/06 Meet with Supervisor 0 Mon 19/06/06 Mon 19/06/06 Final Questionnaire 5 Tue 20/06/06 Mon 26/06/06 Pre-test questionnaire 3 Tue 27/06/06 Thu 29/06/06 Contact Interviewees 10 Tue 20/06/06 Mon 03/07/06. Send out questionnaire 1 Fri 30/06/06 Fri 30/06/06 Interim Project Submission 0 Wed 12/07/06 Wed 12/07/06 Follow-up to questionnaire 5 Wed 12/07/06 Tue 18/07/06 Interviews 10 Mon 17/07/06 Fri 28/07/06 Meet with Supervisor 0 Mon 31/07/06 Mon 31/07/06 Analysis of Primary Research 20 Mon 31/07/06 Fri 25/08/06 Telephone follow-up/interview as required 25 Mon 07/08/06 Fri 08/09/06 Meet with Supervisor 0 Wed 23/08/06 Wed 23/08/06 Draft Project Submission 0 Fri 01/09/06 Fri 01/09/06 Meet with Supervisor 0 Mon 11/09/06 Mon 11/09/06 Refine and amend Submission 19 Mon 04/09/06 Thu 28/09/06. Final Project Submission 0 Fri 29/09/06 Fri 29/09/06 Contingency As previously mentioned, one of the challenges of this paper is the lack of accessible scholarly and academic studies concerning events management in the bar and club businesses. In this regard, this research aims to utilise of the available literature and studies from similar sources such as case studies on certain events and similar operations such as restaurants. This study therefore relies on direct primary data which will be gathered depending on the degree of participation of identified club and bar owners. A contingency is that this paper goes on ahead with the research activity and source information from secondary sources as the foundations of this study; there will be therefore a heavier approach to analysis and the research framework is most likely modified should problems in resources come up. Cited Works and Bibliography Bowdin, Glenn, Harris, Johnny, Oââ¬â¢Toole, William, Harris, Rob, McDonnel, Ian. Events Management, 2nd Ed. London: Elsevier, 2006. Brown, Douglas Robert & Miron, Amanda. The Professional Bar & Beverage Managers Handbook: How to Open and Operate a Financially Successful Bar, Tavern and Night Club. Florida: Atlantic Publishing Company, 2005. Chatterton, Paul & Hollands, Robert. Urban Nightscapes: Youth Cultures, Pleasure Spaces and Corporate Power. New York: Routledge, 2003. Craven, Robin. The Complete Idiotââ¬â¢s Guide to Meeting & Event Planning, 2nd Edition. Exton, PA: Alpha, 2006. Culp, Christopher. The Risk Management Process: Business Strategy and Tactics. New York: Wiley, 2001. Dommermuth W. P. Promotion: Analysis, creativity, and strategy, 2nd ed. Boston: PWS- Kent, 1989. Goldblatt, J. Special Events: Best Practices in Modern Event Management, new York: van Nostrand Reinhold, 1997. Henderson, Karla. ââ¬Å"Marketing Recreation and Physical Activity Programs for Femalesâ⬠. JOPERDââ¬âThe Journal of Physical Education, Recreation & Dance, 66(1995): 53+. Hormozi, Amir & Dube, Leon. ââ¬Å"Establishing Project Control: Schedule, Cost, and Qualityâ⬠. SAM Advanced Management Journal, 64(1999): 32+. Jones, K. S. Night club promotions manual & source list: How to create exciting, profitable event calendars for your bar. Hughes Company, 1993. Mack, Rhonda W. ââ¬Å"Event Sponsorship: An Exploratory Study of Small Business Objectives, Practices, and Perceptionsâ⬠. Journal of Small Business Management, 37(1999): 25+. Michman, Ronald. Lifestyle Market Segmentation. New York: Praeger Publishers, 1991. Roche, Maurice. Mega-Events and Modernity: Olympics and Expos in the Growth of Global Culture. New York: Routledge. Soares, Eric. Promotional Feats: The Role of Planned Events in the Marketing Communications Mix. New York: Quorum Books, 1991. Shore, Anton & Parry, Brynn. Successful Event Management. London: Thomson, 2004. Silvers, Julia. Event Management Body of Knowledge. 2009. Julia Rutherford Silvers. 16 June 2009. http://www. juliasilvers. com/embok. htm. Professional Event Coordination (The Wiley Event Management Series). New Jersey: Wiley, 2003. Smith, Robert. An Entrepreneurââ¬â¢s Guide to Running a Profitable Club Operation. Fairfax, Vermont: Upland Publications, 2001. Webster, Francis & Knutson, Joanne. ââ¬Å"What is Project Management? Project Management Concepts and Methodologiesâ⬠. The AMA Handbook of Project Management, P. Dinsmore & J. Cabanis-Brewin, Eds. New York: AMACOM, 2006. Westerbeek, Hans, Smith, Aaron, Turner, Paul, Emery, Paul, Green, Christine, van Leeuwen, Linda. Managing Sport Facilities and Major Events. Crows Nest, NSW: Allen & Unwin, 2005.
Sunday, September 15, 2019
My Mom Essay
Many people have a specific person who inspires them, but many people still walk from day to day wondering who thereââ¬â¢s is, I know mine is my mother. Anybody can be the person who will inspire you, from a friend, to even a pet dog. A person who inspires you is a person who cares about you and what choice that you make. An adult who inspired me is my mother, she believes in me, cares about me, and always helps me. My mother believes in me, in everything I do, and is always positive about it. Every decision, task, and every level that I concur, my mom is always there, believing in me that I will succeed. Graduating 5th grade and moving up to 6th grade was a big step, just like graduating 8th grade and moving up to 9th grade was. But my mother believed that I would still do well in school and would enjoy it alot. Moving up a grade was always a bit scary, but my mother always had my back, and told me to just do my best, and have fun. With my mothers support I enjoy high school a lo t more than I thought I would. My mother believing in me helped motivate me, and show that I can do everything that I put my mind to. But my mother believing in me isnââ¬â¢t the only way that she inspired me, but that my mom also cared about me. My mother never let a day go by without asking me how my day was or telling me how much she loved me. She always wanted to make sure Iââ¬â¢m having fun, and enjoying life, with no distractions. All kids have heard different sayings that their mom says like, call me when you get there which for many kids they hate to hear it. But my mom says them because she cares what happens to me and she wants me to be always safe and doing the right thing. Whenever things get tough I can always come to my mom and get her opinion. Many kids arenââ¬â¢t very close with their mom but I know I can share anything with my mom and that she will support me always. Not only is my mom very caring, and kind but she is also very helpful. A person who believes in me, cares about me, and helps me always would have to be my mother. Through the thick and thin she always has had my back in everything, and trusts me. Like lots of other mothers, she makes sure that I am enjoying life, and that everyday I feel inspired, to do something great. My mother truly believes in me, cares about me, and is always willing to help me with everything. Hopefully you have an adult that inspired you like my mom inspires me.
Bas Luhrmannââ¬â¢s Romeo + Juliet Essay
Baz Luhrmannââ¬â¢s main aim from his Romeo and Juliet film was to create a film which would trickle the minds of youngsters, or what is also known as the MTV generation, who donââ¬â¢t enjoy watching Shakespeareââ¬â¢s plays. His main aim was getting the MTV generation to watch and ââ¬Ëenjoyââ¬â¢ Shakespeareââ¬â¢s Romeo & Juliet without dieing of boredom. He did this by looking at the movies MTV generation watches today, which mainly includes technology, action, guns etc to get youngsters interested. What he concluded in the film which attracted youngsters was that he replaced the original assets used in the original play into modern equipment, for example, swords were changed to guns, old fashion clothes into todayââ¬â¢s clothes etc but one thing which he kept in the original form is the dialogue, the script. He also had other aims which were to make a film so that youngsters world wide would want to watch it. The film was a success in the world as it made à ¯Ã ¿Ã ½98m worldwide, in America alone it made 46m so the film was a hit all over the world.à The prologue in the beginning of the film was set out to make us, the audience, understand what she is saying clearly. This was done by showing a news presenter on TV quite far away, she was wearing modern clothes but basically she was a normal news presenter to us. All she done did was read the prologue from the play. This simplifies the language used by Shakespeare as we think the words, which the news presenter is saying is in modern language but because it is set out in a modern way, we automatically presume it is in modern language and understand what she is saying. The layout of this is, a female TV presenter reading the prologue from the TV which is in a distance, but the camera slowly zooms into the TV so that at the end all we see is the news presenter reading the prologue with a picture over her left shoulder showing a broken ring and the title underneath which is ââ¬Ëstar crossed loversââ¬â¢ all in modern day settings. The prologue also tells as that this is a story about two families who hate each other and who compete with each other to show whoââ¬â¢s greater. The prologue, voice over, images, words, is used to guide audiences who didnââ¬â¢t completely understand the news presenter as it had images describing what she said, words written after it was said by the voice and images shown to describe what she meant. This simplified the whole prologue, you could almost say Baz Luhrmann was holding our hand and taking us through the prologue slowly again and again until we understood it. The images in the prologue were taken from the streets of America, they were mainly violence which is what consists in our society today. IT had fast camera action, for example, it zoomed in and from the Jesus statue, it had fast camera movements from the helicopter, from the streets, police pursues etc after each word or sentence was read out from the prologue, and if this wasnââ¬â¢t enough, Luhrmann put the words on the screen scrolling through or just appearing to show that audience what was said. IT had modern music in the background which includes hip hop, rock music etc to attract youngsters to watch the film without getting bored. Baz Luhrmann chose to begin like this because it was the most suitable way to keep the audience, especially the youngsters, to say ââ¬Ëwhat happens next?ââ¬â¢ and want to carry on watching the film without getting bored. Luhrmannââ¬â¢s main idea was to get the begging fast and furious to hold on to the audience and want them to understand Shakespeareââ¬â¢s script with them imitating what the words meant in movements, body language, how they said it etc. He used this because is most other films, the beginnings were started off with action to hold on to its audience without boring them and making want more. The gas station was the most important scene in the beginning of the film. This is because they used 170 different shots just to make up the first five minutes, this is because there was a lot of action, slow motion, fast movements, cameras zooming in and out, fast editing of certain scenes etc. IT started off with the Montagueââ¬â¢s coming in the scene with their car in to one part of the gas station and the Capuletââ¬â¢s entering the scene on the other part of the gas station. The introduction of each character is set out by showing the characters and pausing them with their names on them. They introduce each side to us by zooming onto the bottom of their guns when they threaten each other, under each sides guns, their names are written which is the Capuletââ¬â¢s and the Montagueââ¬â¢s. The fight starts off when the Montagueââ¬â¢s see the Capuletââ¬â¢s, the Capuletââ¬â¢s scare the Montagueââ¬â¢s and the Montagueââ¬â¢s insult the Capuletââ¬â¢s by biting their thumb at the them. At this moment the head of the Montagueââ¬â¢s come out and start the fight, straight away a shoot out starts and they shoot at each other. When they shoot at each other the camera uses slow motion, fast editing etc to show the audience action to get their focus on the film. The camera basically introduces the characters slowly and then uses fast editing thereafter. The music used in the film varies a lot as there was a mixture of music used, this ranged from, rock to spaghetti western. This were used in specific parts of the film. The beginning started off with classical when the dialogue was read out by a deep male voice, the part when the Montagueââ¬â¢s are in their car is rock and hip hop, and the part where the Capuletââ¬â¢s are introduced is spaghetti western. There were also other sound effects used in the film when one of the Capuletââ¬â¢s had ââ¬ËSINââ¬â¢ written on a metal plate above his tooth which was an animals voice which frightened the Montagueââ¬â¢s. Thereââ¬â¢s also other sounds for instance ââ¬Ëwhooshââ¬â¢ when bullets fly past their heads, music played when the characters are in slow motion etc This is all used to attract the audiences attention and to get them pumped up, the music is basically ion your face. Tybaltââ¬â¢s shoes makes a particular noise when he walks, this is ââ¬Ëchingââ¬â¢, this noise particularly gets to the audience when he puts out a match in the gas station by rubbing the metal part on the match to the floor, this sends a shiver through the spines of some people which is used to get the full attention of some people or it makes them look at it in great detail. The representations of each gang is set out differently. Montagueââ¬â¢s is introduced first and are shown as trouble makers, this is done by them being dressed up in normal casual wear, for instance, baggy colourful clothing, more open etc. The music used to show them is more of a rock type of song but it also features them listening to hip hop when one part of the music goes ââ¬Ëthe boys! the boys!ââ¬â¢. They are shown to be the cool boys of the town who have a great car and ride around listening to loud music. They shout when they talk, this is to attract the audiences attention once again. They also chase off the sisters in the gas station by one of the members licking his nipple in front of them who he then confronts the Capuletââ¬â¢s. The Capuletââ¬â¢s are shown to be more serious with their gang but the representation of the Montagueââ¬â¢s are shown as they are the hipsters of the area who are out for a laugh and a good time. This represents the Montagueââ¬â¢s innocent in the shoot out and the Capuletââ¬â¢s of the more powerful side having a laugh with them with their powerful ook.
Subscribe to:
Posts (Atom)