Friday, October 18, 2019
Modern definition of success in America Essay Example | Topics and Well Written Essays - 750 words
Modern definition of success in America - Essay Example Black Americans have been able to establish different expectations and attitudes compared to their white counterparts. This has accrued from the historical evolution of the American society (Lipsitz 371). This essay will focus mainly on the African-Americans because they have been known to face the most humiliation and discrimination as compared to other races namely Hindu and Hispanic. The most common form of prejudice was slavery which entailed slaves being owned as properties with no legal rights whatsoever. They could be bought, sold to clear debts and even leased to interested parties. Statistics in the 19th Century showed that the African- Americans comprised of the largest number of slaves who were immigrants of African descent that had crossed the Atlantic sea. Slavery was used as a means of getting slave laborers to produce certain goods for the world market namely sugar and tobacco by working in large plantations (Moon 234). The living conditions of slaves were intolerable at best therefore leading to a number of deaths of African-Americans. The causes of death were mainly poverty and sickness and in some cases, thorough beatings by their masters (Moon 234). Despite this, many Africans still came to the western hemisphere with hopes of a promising future only to be disappointed in the long-run. Slavery died with the Civil War but there was still existence of slaves in various States up to 1840. This the period whereby the one-drop rule came into being which mentioned that any individual who had any level of African ancestry was a negro namely black. Children who had mixed parentage were automatically considered to be black because they had ââ¬Å"one drop of negro bloodâ⬠. The man behind this rule was known as Thomas Jefferson although historical records have found that he bore children of mixed race with his slave known as Sally Hemings. This
Separation and anxieties Essay Example | Topics and Well Written Essays - 500 words
Separation and anxieties - Essay Example Approximately four to five percent of the children in US suffer from this disorder. The disorder is not sex-specific meaning that it affects both males and females equally. The disorder usually wears off during the teens or puberty however a small percentage of people still retain it. Separation anxiety is a natural phenomenon in babies that are of the age group two to four since that is the time when they need their parentsââ¬â¢ constant attention. However as the children grow up and start to become a little independent, this feeling dies off. In some cases, the anxiety persists and hence results in this so called separation anxiety disorder. There are many symptoms which may point towards the presence of this order. Some of the most common ones include not going to school or bed without the parents or a caretaker. Also there is a persistent fear in the minds of these children that something bad will happen to the guardian if they are separated from them which causes them to cry or act in a very hyper manner. Separation anxiety disorder has multiple origins. The most obvious being some mental distress or trauma that a child has gone through like an accident or a death in the family. However many a times the parents themselves are responsible for this condition. Sometimes the anxiety is mutual and a greater contribution comes from the side of the parents who refuse to let go of their children alone. Children whose parents are over protective have a greater likelihood of suffering from the separation anxiety disorder. The disorder is also thought to have genetic origins and it is said that parents who suffer or suffered from separation anxiety have a greater probability of having children who have to go through the same thing. During normal conditions the separation anxiety symptoms usually subside when the child gets assured that the parents
Thursday, October 17, 2019
Are U.S. CEOs overpaid Research Paper Example | Topics and Well Written Essays - 2000 words
Are U.S. CEOs overpaid - Research Paper Example Even if they did not occupy such positions, people with a firm educational background and effective leadership skills should be paid much more than the rest of the population. The publicââ¬â¢s outcry is not entirely misguided; nonetheless, there are facts supporting the high earnings entitled to the CEOs and it remains unclear whether capping CEO salaries will contribute to business success. This paper explores whether US CEOs are overpaid. Statistics According to Kaplan, US CEOs are arguably overpaid (6). According to Walsh, some of the potential triggers of the ââ¬Ëexcessiveââ¬â¢ salaries of CEOs include; too much influence, negligent boards of directors, weak compensation consultants, and formulation of salary scales through stock options among others (73). According to Kay and Van Putten, in 1970, the average Chief Executive Officer earned about $700,000 (189). The amount was 25 times the earning of an average production employee. Three decades later, CEO salaries had ri sen to almost $2.2 million, 90 times more than the salary of an average worker (Kay, and Van Putten, 190). Kaplan argues that with an increase in the value of stocks and other allowance, the average CEO currently earns between 250-500 times the average employeeââ¬â¢s salaries (7). ... Any employee in the technology industry is aware this average salary would hardly hire a well-educated administrative staff in technology-intensive sectors in the United States. According to Thomas and Hill, current CEOs serve shorter terms compared to CEOs of the late twentieth century, hence the sharp rise in the earnings (19). The high rise in CEO salaries may be attributed to the fact that the officers are uncertain about what would happen next. Capitalism seems to have entered the corporate sector to the level that CEO may see it better to earn as much as they can when in such positions (Kay, and Van Putten 191). According to Walsh, todayââ¬â¢s CEOs are virtually carrying out the same duties as their predecessors who earned a much less, but this is not the case with line workers (75). Whereas, the salary gap between a top executive and the average employee calls for a review of the rules to narrow it, Kaplan argues that rectifying the discrepancy may not be achieved (6). Owin g to the fact that CEO salaries top the list of salary scales in most organizations, theirs tend to be fodder to the media. Less widely covered is the substantial salary disparity between employees and junior executive remunerations. It differs by sector, but in most firms, the salary discrepancy becomes clear at the immediate CEO subordinates. At this point the analysts move into a lower pay level, but significant disparities in salary still subsist between a senior executive and a CEO (Kay, and Van Putten 122-127). Relating the average worker pay to CEOs For easier understanding of the salary scale of the average employee in the US, it would be appropriate to analyze all aspects of their salary; wage, shift gap,
Wednesday, October 16, 2019
Quality Management Research Paper Example | Topics and Well Written Essays - 2500 words
Quality Management - Research Paper Example As the head of the Academic Board, I am responsible for the level of quality in the teaching and learning at the UWS. I therefore find it necessary to engage in research to determine a Quality Management Strategy for an improved system of Teaching and Learning in University of West Sydney. The main focus of this paper is the establishment of strategic plan for the implementation of a quality management approach in the UWS. This paper also focuses on implementation of the plan and change management. Among the major recommendations of this paper is promotion of an indiscriminately student-based, quality oriented and feedback based management plan for the teaching and learning program of the UWS. The paper intensely reviews literature and uses critical analysis of facts for clear judgment and accurate recommendations. Introduction Background The University of Western Sydney (UWS) was established 26 years ago. It has a clear mission statement which corresponds with the status which led t o its establishment. The mission is ââ¬Å"To be a university of international standing and outlook, achieving excellence through scholarship, teaching, learning, research and service to its regional, national and international communities, beginning with the people of Greater Western Sydneyâ⬠. According to the Australian Universities Quality Agency Report (2011), the universities vision was adjusted in the 210-2015 strategic plan. The new vision is aimed at stream-lining the objectives of various departments of the university towards a common vision of ââ¬Å"Bringing knowledge to life in Greater Western Sydney through community and business engagement with our learning and our researchâ⬠To achieve this, the university needs to establish a Quality Management Strategy for an improved system of Teaching and Learning. Being the head of the Academic Board, I am commissioned to study the current system of Teaching and Learning and establish an efficient and effective Quality Management Strategy designed to boost the existing system of teaching and learning. Statement of the Problem The university has a total of 28,396 students. 11.5% of these students are international students. To cater for the need of this students are a total or 885 Academic staff and 1,278 non-academic staff. As clearly seen for this figures, the university should have clear quality management and assessment mechanisms to manage this great responsibility. Even with the huge number of employees, without an efficient quality assessment technic, they quality of output of efforts of the university is bound to be minimal (Australian Universities Quality Agency, 2011). Australia has made significant efforts in maintaining quality of its high education. these efforts include performance of national audits by a Committee for Quality Assurance in the early 90ââ¬â¢s by the national. In the late 1990s, Australia developed a National Quality Benchmarking Manual. The most recent effort toward s assuring quality
Are U.S. CEOs overpaid Research Paper Example | Topics and Well Written Essays - 2000 words
Are U.S. CEOs overpaid - Research Paper Example Even if they did not occupy such positions, people with a firm educational background and effective leadership skills should be paid much more than the rest of the population. The publicââ¬â¢s outcry is not entirely misguided; nonetheless, there are facts supporting the high earnings entitled to the CEOs and it remains unclear whether capping CEO salaries will contribute to business success. This paper explores whether US CEOs are overpaid. Statistics According to Kaplan, US CEOs are arguably overpaid (6). According to Walsh, some of the potential triggers of the ââ¬Ëexcessiveââ¬â¢ salaries of CEOs include; too much influence, negligent boards of directors, weak compensation consultants, and formulation of salary scales through stock options among others (73). According to Kay and Van Putten, in 1970, the average Chief Executive Officer earned about $700,000 (189). The amount was 25 times the earning of an average production employee. Three decades later, CEO salaries had ri sen to almost $2.2 million, 90 times more than the salary of an average worker (Kay, and Van Putten, 190). Kaplan argues that with an increase in the value of stocks and other allowance, the average CEO currently earns between 250-500 times the average employeeââ¬â¢s salaries (7). ... Any employee in the technology industry is aware this average salary would hardly hire a well-educated administrative staff in technology-intensive sectors in the United States. According to Thomas and Hill, current CEOs serve shorter terms compared to CEOs of the late twentieth century, hence the sharp rise in the earnings (19). The high rise in CEO salaries may be attributed to the fact that the officers are uncertain about what would happen next. Capitalism seems to have entered the corporate sector to the level that CEO may see it better to earn as much as they can when in such positions (Kay, and Van Putten 191). According to Walsh, todayââ¬â¢s CEOs are virtually carrying out the same duties as their predecessors who earned a much less, but this is not the case with line workers (75). Whereas, the salary gap between a top executive and the average employee calls for a review of the rules to narrow it, Kaplan argues that rectifying the discrepancy may not be achieved (6). Owin g to the fact that CEO salaries top the list of salary scales in most organizations, theirs tend to be fodder to the media. Less widely covered is the substantial salary disparity between employees and junior executive remunerations. It differs by sector, but in most firms, the salary discrepancy becomes clear at the immediate CEO subordinates. At this point the analysts move into a lower pay level, but significant disparities in salary still subsist between a senior executive and a CEO (Kay, and Van Putten 122-127). Relating the average worker pay to CEOs For easier understanding of the salary scale of the average employee in the US, it would be appropriate to analyze all aspects of their salary; wage, shift gap,
Tuesday, October 15, 2019
Strategic capabilities darden Essay Example for Free
Strategic capabilities darden Essay Strategic Capabilities In this part of the report the different capabilities of Darden will be explained and which of these capabilities lead to competitive rivalry. But first the different resources and competences will be discussed which will lead to the capabilities. 1) Resource; A physical resource of Darden is; There different restaurants, with this is meant the different buildings that Darden owns with the different kind of restaurants. 1) Competence; The competence that Darden has is; To make different kind of dishes. 1) Capability When the above mentioned resource ad competence are linked then the following capability emerges; Flexible to make different dishes for different markets. Darden has 8 different brands. Each brand standing for its own kind of food like; Italian of seafood. This means that Darden offers all kinds of food to the consumers. After applying the VRIN model to this capability the conclusion is; V- This capability is a value for the consumers due to the fact that Darden gives them the opportunity to choice between different restaurants. This capability allows Darden to be profitable in the market. R- Different brands plus products are included in one chain. Unfortunately for Darden is capability is not Rare, different competitors have the same kind of capability. ( for example Laundryââ¬â¢s, DineEquity) I- This capability is possible to imitate, but this will take some time and the right amount of financial resources. N- This capability is possible to substitute by another company. For example Yum Restaurants, they have also different dishes for different markets with their Taco bell, KFC and Pizza Hut. Conclusion Capability 1); The above mentioned capability is not one that is unique and that is not difficult to imitate, but however it is still a strength for Darden due to the fact it gives Darden a great brand image, and it gives it an advantage compared to their smaller competitors who do not have this capability as strong as Darden. 2) Resource; A Human resource that Darden has is: Well trained and guided staff. 2) Competence; A competence that Darden has is; Skill to buy the best products (for example Darden sources top quality seafood from more than 100 varieties. 2) Capability; When the above mentioned Resources and competence are combined then the following capability emerges; Capable of making high-quality food. High quality is always something under discussion, what is high quality? In this case is meant food that has a very good quality versus cost proportion. And speaks to a lot of people. After applying the VRIN model to this capability the conclusion is; V- This capability has a great value for the consumers because a good quality versus cost proportion is something that quest will remember and will tell to their friends and families. R- This capability is not rare, there are a lot of restaurants that can make high quality food against a good price for the consumers. I- Is this capability Imitational, yes when looking at the above mentioned point ( R) there it shows other restaurants are already doing this. N- This capability can be substitute, what has been explained earlier is that restaurants are already having the same kind of capability. Conclusion Capability 2) The capability of making high-quality food is very important for Darden because consumers expect a level of quality when they go to one of Dardens restaurants. For this case it is a strength of Darden. However it is not a very strong capability due to the fact that multiple competitors are doing the same and that it is very easy to imitate or substitute. 3) Resource; A resource that Darden has is; There strong marketing. 3) Competence; A competence that Darden has is; Using all kinds of advertising. 3) Capability; When the above mentioned resource and competence are combined then the following capability emerges; Dardens ability to market its restaurants. Darden is a leading advertiser in the full size dining segment of the hospitality industry. Darden uses different kind of methods to advertise their brands, like local and cable television, digital advertising, billboards, search engine marketing, radio and newspapers. After applying the VRIN model to this capability the following conclusion can be made; V-; This capability will generate more consumers which will bring more revenue, if the cost are low enough to be profitable in this part then this can be a huge Value to the company. For the consumers this will also be a Value because they stay up to date with new actions, menu changes and promotions. R-; This capability is not rare at all, almost every company has a marketing department and advertises itself. I-; Marketing is very imitational due to the fact that everybody sees them so other companies can easily use the same kind of method, However due to the fact that Darden has multiple brands is can target and advertise to all these markets at the same time which gives them an advantage. N-; This capability can be substituted by a different company, because there are already companies with multiple brands that target and advertise to different markets. (Laundryââ¬â¢s) Conclusion Capability 3) Of the 3 capabilities mentioned in this part of the report, capability 3 is the weakest. It is still an important part of the company, but it is very difficult to stand out on marketing now a day compared to competitors. It is more a capability that is at least required to be successful. Conclusion Capabilities When looking at the 3 different capabilities explained in this part the capabilities concerning the different dishes and the high quality of food are two strong and important capabilities that Darden has. The marketing capability is not as strong but it is still a plus point of the company. Without the marketing Darden would not be as successful as it is today.
Monday, October 14, 2019
CALPUFF-CALMET Modeling System
CALPUFF-CALMET Modeling System 1. Introduction Nowadays, due to the fast expansion of industrial development and population increase, air pollution has become one of the most serious problems in the world, especially in large cities and consequently, the problem of air pollution and its control has become increasingly. Fossil fuel combustion, especially which based on oil and coal is one of the major causes of the environmental problems affecting both local and global levels. However, several countries are still using fossil fuels as primary energy, especially in developing countries. Electricity consumption in Iran has experienced a considerable growth during recent years because of economical development, industrialization and population increase. In 1973, electric energy generation per capita was 310 kWh, which increased to 2935 kWh in 2008. Electricity generation using fossil fuels has destructive effects on environment. Due to Irans environmental conditions, electricity generation is mainly performed by thermal power plants, so that near 85% of the required electric energy is produced by thermal power plants. Gas-fired power plants are the dominant part which accounted up to 62% of total power generation. Oil-fired power plants generated 22.4% and 14.7% produced from hydroelectric plants. Although hydroelectric plants make 14.7% proportion of plants in Iran, these plants have generated only 5.1% of the power due to a fall in precipitation over the past few years. Natural gas (71.3%) is the largest source of fuel for electricity generation followed by heavy oil (15.8%) and gas oil (12.4%). Although, the main fuel of power plants is gas, the environmental problems are still concerned Air quality is a major determinant of human health. Meteorology plays a great role in determining air quality changes downwind of emission sources. Both the wind and atmospheric stability greatly affect dispersion conditions. Local influences due to terrain and land-cover factors can also be important. Air dispersion and deposition models are tools for estimating concentrations of air pollutants and deposition rates due to industrial or other emission sources (Prince Rupert Airshed Study). Air quality models are instrumental in providing valuable insights into the processes involved in the transport, dispersion and chemical transformation of pollutants in the atmosphere .These models use mathematical equations and numerical methods to describe the concepts involved in the atmosphere. In recent years, CALPUFF model has good performance in the simulation of many kinds of pollutants under complicated topography, especially in the area larger than 50 km. CALPUFF can be run in any specific location around the world, and for any modeling type period selected by the user. Due to its flexibility, CALPUFF has been used in several research studies. Over the past years, several CALPUFF-aided case studies have been published. Shiyao Li et al. (2016) used CALPUFF model to simulate the spatial distribution of sulfur dioxide in Urumqi and analyzes the source contribution to areas where the SO2 concentration is high. Prueksakorn et al. (2014) applied WRF/CALPUFF modeling system and multimonitoring methods to investigate the effect of seasonal variations on odor dispersion in Changwon City of South Korea. Abdul-Wahab et al. (2011) used CALPUFF software to measure and simulate the dispersion of sulfur dioxide (SO2) at the Mina Al-Fahal Refinery in the Sultanate of Oman. Abdul-Wahab et al. (2013) used CALPUFF to study the effect of meteorological conditions on the dispersion of an accidental release of hydrogen sulfide (H2S). Abdul-Wahab et al. (2015) applied CALPUFF to assess the quality of the proposed Miller Braeside quarry expansion in Canada. Hyung-Don Lee et al. (2014) used WRF-CALPUFF software to simulate concentration distributi ons of typical air pollutants (PM10 and SO2) in the Ulsan Petrochemical Industrial Complex (UPIC), and statistics are computed to determine the models ability to simulate observations. In this study, a CALMET diagnostic model nested to WRF model simulation is evaluated by comparison to surface air measurements, along specific periods. Then the CALPUFF dispersion model was used to simulate and predict the concentration of SO2, NOX, CO and PM10 that are emitted from the Shahid-Montazeri power plant (SMPP) of Esfahan, Iran.à The main goal of this study is to evaluate the capability of the CALPUFF model to simulate the concentrations of SO2, NOX, CO and PM10 in the nearby of power plant for special topographical and climatological conditions of the study area. First, the amounts of pollution exhausted from the stacks and the ambient concentrations of pollution due to the emitted gases from the stacks of Shahid-Montazeri power plant have been monitored in four receptors (Figure 1). Then the ambient concentration levels of pollution have been simulated for the receptors, using CALPPUF Lagrangian Gaussian puff model. Finally, the comparison of model prediction results and the monitored concentrations have been done through statistical analysis. â⬠¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦..â⬠¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦.â⬠¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦Ã¢â¬ ¦ 2. Model description Technical description of CALPUFF-CALMET modeling system CALPUFF is one of the US Environmental Protection Agencys (EPA) preferred models for assessing transport of pollutants and their effects, on a case-by-case basis, or for certain near-field applications involving complex meteorological conditions. The modeling system consists of three main components and a set of preprocessing and post processing programs. The main components of the modeling system are CALMET (a diagnostic 3-dimensional meteorological model), CALPUFF (an air quality dispersion model) and CALPOST (a post processing package). CALMET is a diagnostic meteorological model which can make use of topography, land type, meteorological observation data and meteorological simulation data to diagnosis of wind and temperature fields based on the mass conservation equation. Besides the wind and temperature fields, CALMET determines the 2D fields of micro meteorological variables needed to carry out dispersion simulations (mixing height, Monin Obukhov length, friction velocity, convective velocity and others). The quality of a meteorological preprocessor is one of the main determinants of the overall quality of the air dispersion model, and this is particularly true for the CALPUFF/CALMET modeling system in a wide range of conditions. The main purpose of CALMET is to obtain the best possible meteorological data based on the available information. In particular, CALMET can receive measured data, modeled data (i.e., generated by a meteorological model like MM5 or WRF), or both. When a high-resolution terrain data set is available, CALMET is capable of using this information to estimate local deviations from meteorological data measured or modeled at a coarser resolution (Scire J.S). CALPUFF is a multi-species non-steady-state puff dispersion model that simulates the effects of time and space varying meteorological conditions on pollutant transport, transformation, and removal. CALPUFF allows the use of on-site turbulence measurements of the horizontal and vertical Gaussian dispersion coefficients, but also allows for the use of similarity theory and micrometeorological variables, derived from meteorological observations and surface characteristics, to obtain these coefficients. CALPUFF utilizes a Gaussian puff formulation to calculate the concentration of a pollutant (or spores, in our application) at any given location downwind, and the deposition at users specified locations at ground level (Use of a complex air pollution model to estimate W. Pfender). CALPOST can extract CALPUFF simulation data according to customers demand (Spatial distribution and source analysis of SO2 concentration in Urumqi). 3. Methodology a. Description of study area and model domain Isfahan is located in the central Iran inside the plains stretching along the Zayandeh Rood River. The city is located in a relatively mountainous area in the center of the Iranian Plateau and stretches from the snowy Zagros Mountains in the West to the East and North-central deserts of Iran. There exist a variety of climatic conditions in the city thanks to regions with different altitudes. The outstanding features of Isfahan are little rainfall, average less than 125 mm. Isfahan is located in 32.67N, 51.83E, and elevation 1550-1650 m, with more than 1.7 million population (https://amar.sci.org.ir/index_e.aspx). There are more than a million automotive and heavy duty vehicles using diesels, gasoline, and natural gas in Isfahan. This city is known as the largest industrialized region in Iran, where there are many industrial states, steel companies, and etc. There is also one of the biggest electric power plant of Iran. Shahid-Montazeri steam power plant of Esfahan is located 15 km to the northwest of Isfahan along the Isfahan-Tehran highway next to Isfahan Refinery and Petrochemical Complex in a 2.2 million m2 land (Evaluation of synchronous execution of full repowering and solar assisting in a 200 MW steam power plant, a case study) (Figure 1). This power plant has 8 similar steam units each with a capacity of 200 MW. Montazeri plant is a steam power plant which is recently use natural gas. However, Montazeri uses heavy oil during the cold days due to increasing the domestic heating. The study area is located around as Montazeri power plant, with a total capacity of 1600 MW and two large smoke stacks (205 agl-m height, above ground level meters height and 1725 base elevetion) with four independent liners (one per boiler) in the same concrete shaft that are selected point sources (Figure 2).à Therefore, it should be considered as eight different point sources practically located at the same point; alternatively, it can be considered as a two point sources, with an emission and stack section as the sum of the four liners (Validation of CALMET/CALPUFF model simulations around a large power plant stack). In this study, dispersion of SO2, Nox, and particulate matter (pm10) emitted from the Montazeri power plant over the Esfahan basin was evaluated for two periods of days (from 10 to 31 January 2000). A simulation domain of 100100 km2 was selected by the power plant positioned at the center, in order to cover any pollutant source local impact. This area is divided into 10000 grids, the size of which is 1 km 1 km. The southwest corner of the domain is located at longitude 50.96E, latitude 32.35N. The northeast corner is located at longitude 52.03E, latitude 33.24N and the elevation of the study area varies from 1500 to 2800 m. Table 1 represents the information model input which is used for defining the case study meteorological domain. b. Emission data The main sources of pollutants in Montazeri power plant are resulted from exhaust gases of the stacks which cause air pollution in the power plant area and its surrounding. The values of SO2, NO, NO2 and PM10 emissions from the stacks of Montazeri power plant have been measured by Testo 350-XL device for gases and ISOSTACK BASIC device for particulate maater, during the period of simulation. The data of stack characteristics and the emission rate of the pollutant have been presented in Tables 2. This release huge quantities of sulfur dioxide due to Steam power plants of Iran are not equipped with FGD systems to reduce SO2 emissions, and thereby, the emission factor of this pollutant is only influenced by electricity generation efficiency and sulfur percentage of the consumed heavy oil. In this study, we used data observed from four monitoring station to measure so2, nox and pm 10 (figure 1). Location of the monitoring stations (receptors) has been presented in Cartesian coordinate system in Table 2. Measurements at the monitoring station were done based on the average hour concentrations. c. Meteorological data Surface hourly observations in TD-3505 format were obtained from the Integrated Surface Hourly Database (ISHD) supported by the US National Climatic Data Center (NCDC) . Data was extracted hourly for the entire modeling period from March 10, 2012 at 00h00 UTC to March 12, 2012 at 23h00 LST. Due to the large number of missing data of the other surface meteorological parameters (such as: pressure, ceiling height and cloud cover) only temperature and wind speed were validated.à The purpose of extracting this data was only to evaluate the accuracy of the calmet model to simulate the vertical profiles of wind and temperature. Figure 3 shows the location of the meteorological station used in this study and a description of the surface stations is provided in table 3 d. Modeling approach The initial phase of CALPUFF modeling system involves the derivation of three dimensional meteorological wind fields for the study area using CALMET a diagnostic meteorological model (Estimated Public Health Exposure to H2S Emissions from a Sour Gas Well Blowout in Kaixian County, China). The input of CALMET model includes geophysical data (land use categories and terrain elevations), meteorological data (surface and upper air meteorological observations or meteorological fields generated by prognostic models) (A study of the effects of vehicle emissions on the atmosphere of Sultan Qaboos University in Oman). Due to lack of the surface and upper air meteorological data in the study area we used the Weather Research and Forecasting (WRF: version 3.5.1) model to simulate of meteorological conditions. The Weather Research and Forecasting (WRF), a prognostic meteorological model, was used to calculate the hourly three-dimensional meteorological fields For CALMET model (Applications of WR F/CALPUFF modeling system and multi-monitoring). The WRF model description presented in Table 2. Initial conditions and boundary conditions are provided by the 1.0 degree National Centers for Environmental Prediction (NCEP) Final Analysis (FNL) at 6-h intervals (Use of high-resolution MM5/CALMET/CALPUFF system: SO2 apportionment to air quality in Hong Kong). Data in WRF output files can be interpreted and converted to a format compatible with CALMET by CALWRF program (Scire et. al.2000b). CALMET requires geophysical data to characterize the terrain and land use parameters that potentially affect dispersion. Terrain features affect flows, create turbulence in the atmosphere, and are potentially subjected to higher concentrations of elevated puffs. Different land use types exhibit variable characteristics such as surface roughness, albedo, Bowen ratio, and leafarea index that also affect turbulence and dispersion (The use of an atmospheric dispersion model to determine influence regions in the Prince George, B.C.). Terrain elevation for the CALMET was obtained using the TERREL processor. The model was executed with terrain maps provided by Consultative Group on International Agricultural Research (CGIAR) and the Consortium for Spatial Information (CSI) website (http://www.cgiar-csi.org/data/srtm-90m-digital-elevation-database-v4-1), Data were collected as part of the Shuttle Radar Topographic Mission (SRTM) and processed by CSI into 5 x 5 degree tiles at 90-metre resolution. Land characteristics in the domain were extracted using the CALMET pre-processor CTGPROC. The input land use maps were obtained from the United States Geological Survey (USGS) websites in GeoTIFF format. Terrain characteristics map in the study area has been displayed in Fig. 3. To provide meteorological input to the CALPUFF model, the CALMET diagnostic model and WRF mesoscale prognostic model were coupled. The CALPUFF model uses the output file from CALMET together with source, receptor, and chemical reaction information to predict hourly concentrations. e. Statistical Data Analysis To determine the reliability of the simulation data, verification of simulated values using the WRF and CALMET models was conducted for surface temperature and wind speed at surface monitoring station using several statistical indicators. The statistical verification of model performance in this study was performed using four statistical indicators namely the Bias Error (B), Gross Error (E), Fractional Bias (FB), Normalized Mean Square Error (NMSE), Root Mean Square Error (RMSE) and Index of Agreement (IOA). The formulas used to derive these four indicators are given in Equations
Subscribe to:
Posts (Atom)